Support Email
Katrina@lockpick.cn
Banana@lockpick.cn
Pawpaw@lockpick.cn
Sabine@lockpick.cn
KPC App
Skype
lockpick-cn
szlocksmith
szlocksmith.cn
lockpick-cn
WhatsApp
+8613088855511
+8617704031970
+8613322922045
+8613088855511
 KPC Pro General Home > Auto Idols > KPC Pro General 
Daihatsu SST(Key Programming for 4C / 4D Twist)- Use Manual
       
 
No.: G20005 Attribute: HW Area:
Price: USD$149.99
 
 

No.1 Key Programming for Daihatsu(4C Twist)

●Step for adding remotes (not smart key)

①left the door open. Connect SST to OBD socket in car, then turn on SST device.

②plug the programmed master key into ignition cylinder within 5s

(when entry the emergency key, make sure the smart card should be in enough depth to touch the ignition)

③Twist the ignition for 3 times within 5sON⇔ACC

④Once switching to the “Add key” mode, car responses, doors will lock & unlock automatically

⑤Pull the key out of the ignition lock.

⑥After the vehicle responds, insert the new key to be added into the ignition lock within 20s

⑦Once key programming done, please confirm the car status, the doors are perfect to be locked and unlocked. Remove the SST to finish the programming.

*Except for the master key and added keys done during the programming, other programmed keys will be deleted.

⑧If you want to program 3 or more keys, please insert the keys to be added into ignition locks after step 7 (programming done, car response, door locks work well) done in 20 seconds.

(same operation to program the 4th key)

⑨Once key programming finished, please confirm the car status, the doors are perfect to be locked and unlocked. Remove the SST to finish the programming.


●Step for adding smart key (keyless)

① Connect SST to OBD socket in car, turn on SST. Remain the car doors open.

②Insert the programmed master key into ignition lock in 5 seconds

(when entry the emergency key, make sure the smart card should be in enough depth to touch the ignition)

③Twist the ignition lock for 3 times within 5s ON⇔ACC

④Once switching to the “Add key” mode, car responses, doors are able to be locked & unlocked automatically

⑤Get the key out of the ignition lock.

⑥Press both buttons “Lock”&”Unlock” of smart key in 20s when car is under response, until 3 beeps sounded. Meanwhile, the indicator of the smart key is flashing in red light.

⑦Release the buttons during the 3rd beeps. Another beep will be sounded in 4s, and indicator lights in red.

⑧Press buttons “Lock” and “Unlock” in 3s when indicator light is red.

⑨During smart key programming in 4s, indicator will light in green, please confirm the car status, the doors are perfect to be locked and unlocked. Remove the SST to finish the programming.

If want to continue the 3rd key, please do not remove the SST, then repeat the steps 6-9 to complete.


●Step for deleting Daihatsu key

When in ”Delete Key” mode, except for the used key, other remotes and smart keys will be deleted. As long as the smart key is deleted for once, it can no longer be programmed.

① Open car door, remain status that ignition lock is without key

②Connect SST to OBD socket in car, turn on SST.

③Insert the programmed master key into ignition lock in 5 seconds

(when entry the emergency key, make sure the smart card should be in enough depth to touch the ignition)

④Twist the ignition lock for once within 7s ON⇔ACC, press ignition button for 3 times.

⑤Once switching to the “Delete Key” mode, car responses, doors will locked & unlocked automatically

⑥After car responses, please twist the ignition lock for 3 times in 10s ON⇔OFF (Also for ACC)

⑦Once the key was finished to be deleted, car responses.

⑧Get the key out of the ignition lock.

⑨Turn off SST, or pull it out from socket.

⑩Deleted


No.24D TwistKey Programming for Daihatsu (4D Twist)

●Step for adding master key

① Remain the car doors open and under status that ignition lock is without key (OFF status)

②Connect SST to OBD socket in car, turn on SST.

③Insert the master key into ignition lock, twist the ignition lock for 3 timesACC⇔ON

④Once switching to the “Add key” mode, car responses, doors will lock & unlock automatically for twice

⑤Get the master key out of the ignition lock.

⑥After car responses, please insert the new master key to be programmed into ignition lock within 30s.

⑦Immo programming success, car responses, doors will lock & unlock automatically for twice

Pull SST out of socket and finish the programming.


●Step for adding smart key (keyless)

①Remain the car doors open and under status that ignition lock is without key (OFF status)

②Connect SST to OBD socket in car, turn on SST.

③Insert the master key into ignition lock, and twist for 3 times ACC⇔ON

④Once switching to the “Add key” mode, car responses, doors will lock & unlock automatically for twice

⑤Get the master key out of the ignition lock.

⑥After car responses, please insert the mechanical key of Daihatsu smart key into ignition locks within 30s, and make sure the logo side of smart key should touch the ignition lock.

⑦Immo programming success, car responses, doors will lock & unlock automatically for twice

⑧Within 30 seconds of the immoprogramming done, please put the smart key at the upper right corner of the front seat.

⑨Smart key programming success, car responses, doors will lock & unlock automatically for twice

⑩Get the mechanical key out of the ignition lock.

Pull SST out of socket and finish the programming.


No.3 Daihatsu Push Start Programming

①Remain the car doors open and car under OFF status

②Connect SST to OBD socket in car, turn on SST.

③Operate CC ⇔ IGON⇔OFF for twice in 10s

④Open and close the door of driver’s seat for 3 times in 10s

 Once switching to the “Add Key” mode, car responses, doors will locked & unlocked automatically

⑤Within 30s

If to add mechanical key of master key: please use emergency key to touch START button, once confirming to add key, car responses, doors will lock & unlock automatically for twice.

If to add smart key: please use smart key to touch START button, once confirming to add key, car responses, doors will lock & unlock automatically for 4 times.

If continue to add 2 or more keys, please press START button and operate step④.

Pull SST out of socket and finish the programming.


Method to forcibly start the ignition switch


Insert the keys and turn on SST. Use the key to press down the key hole for 7 times (do not twist) and then pull out the key. When car responses, doors will locked & unlocked automatically, please twist the key to turn on ignition switch.


Force to turn switch to ON, then connect KPC pro.


When it is 4C Twist, if not force to start the ignition lock, it’s unable to connect KPC pro and renew.


When it is 4D Twist, it is able to connect KP pro and renew under OFF status, without force to start the ignition lock.


If connection failed, please force to turn on ignition lock, connect KPC pro.


4C Twist can be programmed All Key Lost through KPC pro


If it’s 4D Twist, please plug SST and turn it on, insert the key and complete the all key lost programming, after that car responses, doors will locked & unlocked automatically.

 
Help Center
Shopping Guide
Payment Methods
Shipment & Delivery
 
Technical
Technical Articles
Download Center
YouTube Videos
 
About us
About us
Privacy Policy
Contact us
 
Mobile website
 
Autoldol-release
2022 @ Auto ldol KPC Pro All Right Reserved

Microsoft VBScript ʱ '800a01a8'

ȱٶ: ''

/AU04AutoIdols/p-001-1.asp 450